The GeoTech PCS 50 L roller chipper integrates a main pressure and shredding mechanism, along with two cutting blades. These blades are designed to effectively reduce plant waste, especially the fibrous and tougher materials, into smaller pieces. The material is introduced into the machine through a hopper located at the top, where the blades begin their cutting work, preparing the waste for the next shredding stage via the roller.

This combined cutting and crushing mechanism ensures that the chipper is effective on a wide range of materials, from dry and hard branches to wet green materials and leaves. The inclusion of the cutting blades not only increases the overall efficiency of the machine but also helps reduce the risk of clogging, especially when dealing with thicker or knotted branches.

The GeoTech PCS 50 L is ideal for those seeking an efficient and quiet solution, especially if most of the waste to be processed consists of green or slightly woody material.

The strengths of this machine include:

• Robustness: thanks to the steel rotor system, the chipper guarantees long durability and resistance.
• Cutting diameter: it can easily handle up to 65 mm of green wood (not dry), compared to the 50/60 mm maximum typically achieved by petrol-powered shredders in the same power range. However, for branches over 50 mm in diameter, it is necessary to feed the branch slowly to allow optimal shredding.
• Exceptional work capacity: the GeoTech PCS 50 L can handle intense and heavy-duty sessions, even shredding large diameter wood consistently at a professional level.
• High hourly productivity: well above traditional petrol-powered shredders with rotor blades and hammers, achieving productivity rates of 2.5/4 cubic meters per hour.

A limitation of the GeoTech PCS 50 L is that the final size of the shredded material is larger than average due to the lack of centrifugal hammers. This chipper is specific for chipping medium and large diameter branches, in accordance with the maximum cutting diameter indicated for each model. It is not suitable for leaves or small green material and is less effective on small diameter branches.